advantageous than PE foaming material, such as sunshade panels, insulation panels

advantageous than PE foaming material, such as sunshade panels, insulation panels

Contact us

cooperationlike@gmail.com

The coastal version uses a manual pop-up roof, the marine version is an electric system that expands the interior height, the roof suitcase can be converted into a double bed, and the roof bed now replaces the wooden lath with plastic springs. but the flat bed in the back chair remains the same. The secret compartment on the trunk door can hold two picnic chairs and a small table can be taken out on the sliding door. There are expandable sunshades on the side of the car, and two picnic chairs are hidden in the compartment above the suitcase door. Although the whole car is loaded with living function space, there is still plenty of space in the trunk. The driver and front passenger seats can be rotated, and four people can be seated around the sliding table.

advantageous than PE foaming material, such as sunshade panels, insulation panels

Although the solar greenhouse has a very good thermal insulation performance, but from the point of view of safety, heating equipment is still an important factor. The southern part of our country generally does not need to heat up, but if we encounter bad weather continuously, we still need to use the energy stored in the greenhouse itself, otherwise it will not be able to meet the growth of vegetables. Therefore, whether in the south or north, heating equipment has always been a necessary protective measure. The technical aspect requires that in the equipment configuration of solar greenhouse, the configuration of thermal insulation equipment should be demonstrated in great detail. Of course, the work of Wuhu solar energy greenhouse needs the cooperation of a variety of equipment, with higher and higher temperature requirements, especially in autumn and winter production, external sunshade system, internal thermal insulation system and window opener and fan, wet curtain and other equipment need to be applied. For more information about the cost of Wuhu solar greenhouse, please contact Minghao greenhouse Engineering Construction Company directly.

However, because the bubble body is a poor conductor of heat, the cooling process often shows that the surface bubble body has been cooled and solidified, while the temperature of the core bubble body is still very high, assuming that the cooling setting ends at this time, although the bubble body has been solidified and shaped on the outside, but the core is still at a high temperature, and its heat will continue to transfer, raising the temperature on the surface of the bubble body. Coupled with the expansion force of the core bubble, it is possible to deform or split the stereotyped bubble. Therefore, for EPP manufacturers, it is necessary to ensure a sufficient cooling setting time for the cooling and curing of foamed products. In areas where higher working temperature is needed, EPP foaming material is more advantageous than PE foaming material, such as sunshade panels, insulation panels of instruments and places where the temperature between the doors is easy to rise.

This time we have introduced a number of popular car sunshade umbrellas. I wonder if you have found your favorite car sunshade among them. Every summer, the car at home becomes an amazing oven, which makes it impossible to ride without opening the door to dissipate heat and ventilation, which becomes a big worry when you go out. Although the car sunshade can not keep the temperature in the car as cool as in spring and autumn, it can also effectively reduce the temperature and keep it within a tolerable range. Coupled with the fact that the price is not expensive, it can be said to be a necessary automotive product for all families with cars.

advantageous than PE foaming material, such as sunshade panels, insulation panels

Polyurethane, according to the different products of polymerization, is commonly divided into hard polyurethane and soft polyurethane. Polyurethane foam is widely used in automotive interior decoration and vibration-absorbing parts, such as coating materials, polyurethane rigid plastic plates, polyurethane elastomers, seat soft foam materials, decoration parts, sofa leather, roof accessories; the most widely used is a variety of soft and hard polyurethane foam materials, which have vibration insulation, sound insulation, noise reduction, thermal insulation; PU can also be made into automotive polyurethane coatings, binders, sealants and so on. The PU representative parts on the car are dashboard, rearview mirror, bumper, seat cushion, headrest, steering wheel, instrument panel anti-vibration pad, pillar decoration, front roof lining, window frame, ceiling and side roof frame decoration, door liner, sunshade panel, rear roof frame decoration and so on.

Car sunshade can prevent leather seats and dashboards from being damaged by ultraviolet rays. Direct exposure to the sun will make the temperature in the car as high as 70 degrees. Not only the shell of the central console is easy to deform, instruments and other equipment on the dashboard are also damaged by high temperature, such as aging components, pin soldering, etc., sunshade can effectively avoid direct sunlight.

The design of imitation carbon fiber is used in the sub-dashboard and the handle of the four doors, and the handle of the four doors is strengthened to the maximum strength of 45kg, and the element of rivets is added, which not only has a good feel, but also brings strong sense of security for the vehicle when driving on a bumpy road. In the face of the summer sun, the vehicle is also equipped with sunshade curtains, which is really “full of sincerity”.

advantageous than PE foaming material, such as sunshade panels, insulation panels

Car audio is mostly installed in the upper part of the dashboard and should be protected from sunlight. If the doors and windows are not tightly sealed, they should be replaced immediately. Otherwise, the loudspeaker is easy to rust and damage, and even lead to short-circuit burning damage of the host. In the audio mainframe, the temperature changes to different degrees because of the difference between circuit boards and plastic components. Therefore, in hot weather, it is best to use sunshades to protect against the hot sun and avoid direct sunlight.

Why use sunshade? The main advantage of car shading is to block the sun, so that the light in the action area can not enter the car, which can reduce the burning inside the car to a certain extent, and prevent leather seats and dashboards from being damaged by ultraviolet rays.

Shanghai Luotaofu PC sunlight board integrates daylighting, heat preservation and sound insulation, which can be used for greenhouse, furniture canopy, office sound insulation, outdoor advertising light box and so on. Foreign countries even appeared in addition to the supporting structure, pure polycarbonate material of large transparent lighting house, a sunshine, crystal transparent, warm and pleasant. In the aspect of greenhouse construction, there are greenhouses built with sun panels, greenhouse with gables using sun panels, and greenhouses built with gables and sidewalls using sun panels. In terms of greenhouse efficacy, there are production-oriented greenhouses, trade greenhouses based on flower trading centers, and greenhouses based on scientific research. Sunpanels are a wide range of building materials that can also be used in sunshades and canopies. Zhejiang general-purpose solar panel